Governors & Actuators

Actuators

For more than 100 years, HEINZMANN has been developing and manufacturing high-performance actuators. The portfolio encompasses electric actuators for any type of engine, for original fitting just like for retrofitting.
Recognised for their fast and precise performance, HEINZMANN actuators are robust and operate reliably - reflecting the highest quality demands we make on our products.

For selecting corresponding speed governors, please refer to this ALLOCATION TABLE

Direct Acting Rotary Actuators

Actuator	StG 3005 / StG 3010	StG 1 / StG 2	StG 2005 / StG 2010 / StG 2040 / StG 2080	StG 3	StG 2005 DP / StG 2040 DP	StG 2120

Torquemax Rotation Response Time Feedback	0.3 / 0.6 Nm 53° 70 ms digital	0.9 / 1.4 Nm 68° 40 ms analogue	0.8 / 2 / 7.4 / 11 Nm 36° or 68° 40 ms - 85 ms analogue (2010/2040/ 2080) digital (2005)	3 Nm 72° 70 ms analogue	0.8 / 5.6 Nm 32° / 36° 50 ms digital	13 Nm 68° 100 ms analogue
Certification			ATEX LR Certificate StG 2010/2040/2080			ATEX zone 1 & 2
Further models	Governors DG 3005.10 DG 3010.10		Positioners StG 2040/2080-PD Governor DG 2080.11
Engine Types	Diesel engines, Gas engines	Diesel engines, Gas engines	Diesel engines, Gas engines, Dual fuel engines	Diesel engines, Gas engines, Gas & steam turbines	Diesel engines	Turbines
Documents	Manual ORION governor Leaflet ORION governor	Manual E1-F / E2-F governor (analogue)	Data Sheet StG 2010 Data Sheet StG 2040/2080 Manual Manual E2005 / E2010 / E2040 / E2080 governors (analog) Manual E2005 governor (digital) Manual PANDAROS II governor (digital)	Data Sheet StG 3	Manual PANDAROS IV governor (digital)

Rotary Actuators with Gearing

Actuator	StG 6/10	StG 16/30/40 StG 30.90/40.90	StG 64/90	StG 180

TorqueMAX Rotation Response Time Feedback	6 / 10 Nm 36° 75 ms / 60 ms analogue	15 / 31.5 / 44 Nm 42° / 90° 120 ms / 190 ms analogue	64 / 90 Nm 42° 270 ms / 320 ms analogue	180 Nm 42° 320 ms analogue
Further models		Positioners StG EC 15/30-PD StG 30.90/40.90-PD
Engine Type	Diesel engines, Gas engines	Diesel engines, Gas engines, Turbines	Diesel engines, Gas engines, Turbines	Diesel engines, Gas engines, Turbines
Documents	Data Sheet StG 6/10 Manual E 6/E 10 governors (analog) Manual HELENOS I governor (digital) Manual PANDAROS I governor (digital)	Data Sheet StG 16/ 30/40/30.90/40.90 Actuators Manual E16/E30/E40 governors (analogue) Manual PRIAMOS I governor (digital) Manual PANDAROS III	Data Sheet StG 64/90 Manual PRIAMOS II governor (digital)	Data Sheet StG 180 Manual PRIAMOS III governor (digital)

Linear Actuators

Actuator	LA 25	LA 30	LA 35

Output Operating Range	25 N 19.5 mm	30 N 15.5 mm	35 N 12.5 mm
Documents	Leaflet ORION Governor Systems Manual ORION Governor Governor System

Hydraulic Actuators

The range of hydraulic actuators contributed to the HEINZMANN portfolio by REGULATEURS EUROPA is built on 60 years of experience in hydraulic governing. Customers in the industrial, marine and rail traction sector acknowledge these actuators for high reliability and durability along with excellent performance.
All models are designed to be controlled by digital controllers VIKING35, DC8 or XIOS. Alternatively, they can interface with other controllers as part of a customised engine management system by REGULATEURS EUROPA.

Actuator	Description	Applications / Engine Types	Documents
2221-1G	Proportional actuator with output range of 8, 12, 15, 25, 34 or 40 ft. lbf., used on numerous engine types and applications thanks to its wide range of work output.	Medium and high speed diesel engines, Steam turbines Gensets Rail Traction	Data Sheet
2231-1G	Proportional actuator with output range of 8, 12, 15, 25, 34 or 40 ft. lbf., featuring a mechanical hydraulic governor as a ballhead backup in the case of a power failure or controller fault, providing various manual speed setting options. Popular actuator model for marine propulsion engines and other applications where common mode failures must be minimised.	Diesel engines Marine Gensets	Data Sheet
2222/2232-1G	Proportional actuator with output range of 60 or 80 ft. lbf., featuring a two-stage, high stiffness, backlash free hydraulic servo mechanism for best possible control on larger engines requiring increased work outputs. Option for start/boost pressure fuel limiter and/or a mechanical hydraulic governor as a ballhead backup	Medium speed diesel engines Gensets Marine	Data Sheet
2223/2233-1G	Proportional actuator with output range of 120, 200 or 250 ft. lbf., featuring a two-stage, high stiffness, backlash free hydraulic servo mechanism for best possible control on large medium-speed engines. Option for start/boost pressure fuel limiter and/or a mechanical hydraulic governor as a ballhead backup	Medium speed diesel engines Gensets Marine
2800	Compact proportional actuator with output of 30 ft. lbf. for use in both new and retrofit applications due to its standard UG-8 compatible base. Option for start/boost pressure fuel limiter	High speed Diesel engines Gensets Industrial Plants	Data Sheet
Series 20	Small proportional actuator with output of 4.7 ft. lbf., using engine oil for its operation but with a self-contained oil pump and accumulator. Can be used with a range of proprietary ECUs, making it an ideal solution for upgrade/retrofit installations	Small diesel engines, gas engines Gensets	Data Sheet

Electric Actuator

For selecting corresponding speed governors, please refer to this ALLOCATION TABLE

Direct Acting Rotary Actuators

Actuator	StG 3005 / StG 3010	StG 1 / StG 2	StG 2005 / StG 2010 / StG 2040 / StG 2080	StG 3	StG 2005 DP / StG 2040 DP	StG 2120

Torquemax Rotation Response Time Feedback	0.3 / 0.6 Nm 53° 70 ms digital	0.9 / 1.4 Nm 68° 40 ms analogue	0.8 / 2 / 7.4 / 11 Nm 36° or 68° 40 ms - 85 ms analogue (2010/2040/ 2080) digital (2005)	3 Nm 72° 70 ms analogue	0.8 / 5.6 Nm 32° / 36° 50 ms digital	13 Nm 68° 100 ms analogue
Certification			ATEX LR Certificate StG 2010/2040/2080			ATEX zone 1 & 2
Further models	Governors DG 3005.10 DG 3010.10		Positioners StG 2040/2080-PD Governor DG 2080.11
Engine Types	Diesel engines, Gas engines	Diesel engines, Gas engines	Diesel engines, Gas engines, Dual fuel engines	Diesel engines, Gas engines, Gas & steam turbines	Diesel engines	Turbines
Documents	Manual ORION governor Leaflet ORION governor	Manual E1-F / E2-F governor (analogue)	Data Sheet StG 2010 Data Sheet StG 2040/2080 Manual Manual E2005 / E2010 / E2040 / E2080 governors (analog) Manual E2005 governor (digital) Manual PANDAROS II governor (digital)	Data Sheet StG 3	Manual PANDAROS IV governor (digital)

Rotary Actuators with Gearing

Actuator	StG 6/10	StG 16/30/40 StG 30.90/40.90	StG 64/90	StG 180

TorqueMAX Rotation Response Time Feedback	6 / 10 Nm 36° 75 ms / 60 ms analogue	15 / 31.5 / 44 Nm 42° / 90° 120 ms / 190 ms analogue	64 / 90 Nm 42° 270 ms / 320 ms analogue	180 Nm 42° 320 ms analogue
Further models		Positioners StG EC 15/30-PD StG 30.90/40.90-PD
Engine Type	Diesel engines, Gas engines	Diesel engines, Gas engines, Turbines	Diesel engines, Gas engines, Turbines	Diesel engines, Gas engines, Turbines
Documents	Data Sheet StG 6/10 Manual E 6/E 10 governors (analog) Manual HELENOS I governor (digital) Manual PANDAROS I governor (digital)	Data Sheet StG 16/ 30/40/30.90/40.90 Actuators Manual E16/E30/E40 governors (analogue) Manual PRIAMOS I governor (digital) Manual PANDAROS III	Data Sheet StG 64/90 Manual PRIAMOS II governor (digital)	Data Sheet StG 180 Manual PRIAMOS III governor (digital)

Linear Actuators

Actuator	LA 25	LA 30	LA 35

Output Operating Range	25 N 19.5 mm	30 N 15.5 mm	35 N 12.5 mm
Documents	Leaflet ORION Governor Systems Manual ORION Governor Governor System

Governors

Hydraulic Governors

The range of hydraulic governors included in the HEINZMANN portfolio by REGULATEURS EUROPA is built on 60 years of experience in hydraulic governing. Customers in the industrial, marine and rail traction sectors recognise these governors for their high reliability and durability, along with their excellent performance. Either as a standard product or as part of a customised engine management system, REGULATEURS EUROPA is seeking to provide the perfectly configured governor/actuator for the application's requirements.

Governor	Description	Applications / Engine Types	Documents
1100-4G	Popular hydraulic governor, providing mechanical speed control of diesel or steam turbine driven gensets. Option for electrically operated stop and/or start fuel limiter Output range: 8, 12, 15, 25, 34 or 40 ft. lbf.	Medium and high-speed diesel engines Steam turbines Gensets	Data Sheet 1100-4G
1115-4G	Common hydraulic governor, providing mechanical speed control of marine propulsion engines. Enables infinitely variable speed control from a command lever thanks to its stepper motordrive module. Option for electrically operated stop, start fuel limiter or boost pressure fuel limiter Output range: 8, 12, 15, 25, 34 or 40 ft. lbf.	Medium and high-speed diesel engines Marine
1800-2G	Powerful mechanical hydraulic governor, providing mechanical speed control and featuring a two-stage, high stiffness, backlash free hydraulic servo mechanism for best possible control on engines whose fuel control systems require a high work output. Option for start/boost pressure fuel limiter Output range: 60 - 80 ft. lbf.	Medium-speed diesel engines Gensets Marine	Data Sheet 1800-2G
1500-3G	Largest of the RE hydraulic governors, providing mechanical speed control and featuring a two-stage, high stiffness, backlash free hydraulic servo mechanism for best possible control on engines whose fuel control systems require a high work output. Option for start/boost pressure fuel limiter Output range: 120, 200 or 250 ft. lbf.	Medium and large diesel engines Gensets Marine	Data Sheet 1500-3G
2100	Hydraulic governor, providing mechanical speed control of high-speed engines, with options to provide electrical or pneumatic speed control and boost pressure fuel limitation. Output range: 8 or 11 ft. lbf.	High-speed diesel and gas engines Gensets Pumps	Data Sheet 2100

Digital Speed Governors

HEINZMANN governors are recognised for their great reliability and durability along with their excellent performance. Available in a wide range, these speed governors are perfectly configurable in order to meet any application's requirements. Combined with the appropriate actuator, HEINZMANN control units make up high-quality governor systems for diesel engines, gas engines, dual fuel engines and gas turbines, water turbines, steam turbines.

Control Unit	Speed Governor	Applications / Engine Types	Documents
XIOS UC1	The modular, universal XIOS controller presents an entirely new generation of ECU. It consists of a high-performance main board with high CPU power, large DRAM and FLASH memory. A FPGA logic chip leaves more computing power to the CPU for PLC functions or processor-intensive control tasks. Additional I/O boards can be attached to the main board in different number and type. They are configurable by software, jumperless and small in size. XIOS enables customers to develop their own control functions based on CoDeSys (IEC 61131-3) or MATLAB™/Simulink. It is applicable for alarm and monitoring purposes just as well. 32 Bit 264 MHz processor Communication interfaces Ethernet, CAN, RS232, RS485 optional 4.3" display Protection grade IP00 or IP6K9K Power supply: 9...32 VDC Marine certified >> view certificates	Combustion engines Turbines Gensets	Leaflet XIOS Data Sheet XIOS Flyer XIOS-PLC
ADG-T ADG-TT	The ADG (Advanced Digital Governor) for steam turbine drive applications is part of the Si-TEC product range developed and produced by HEINZMANN Australia. The ADG is the ultimate solution for steam turbine control performance and includes additional functions, features as well as communications for user-friendly operation. Precise speed governing typically within 0.1 % of operating speed at steady state Dual MPU (or Prox.) speed sensors for redundancy Wide range of actuator interface options Auto start and warm through sequence Interpolating multiple speed PIDs Process control for variable speed application (e.g. level control) Single turbine governing used for constant or variable speed applications Dual (tandem) turbine governing system (ADG-TT) used for constant or variable speed applications Seamless (bumpless) transfer between control modes Extensive user selected control functionality Controlled test of over speed protection Extensive alarm functions On board diagnostics Dedicated RS485 MODBUS® Port for customer PLC/DCS interface	Steam Turbines Refineries Petrochemical Compressors Pumps Mills Vessels	Data Sheet Si-TEC ADG
Viking35	ECU with large range of I/O's for most diverse and complex control and monitoring tasks Operated in conjunction with the range of hydraulic actuators by Regulateurs Europa Protection grade IP00 Power supply: 24 VDC	Diesel engines Dual Fuel Engines Turbines Marine Rail Traction Gensets	Data Sheet Viking35
DC 1-03 DC 1-04	Operating as part of PRIAMOS governor systems together with HEINZMANN rotary actuators with gearing DC 1-04 driving up to 2 actuators Power supply: 24 VDC Protection grade IP55 Marine certified >> view certificates PRIAMOS I governor for engines < 5 MW combination of DC 1-03 and actuators StG 16/30/40 PRIAMOS II governor for engines < 10 MW combination of DC 1-03 and actuators StG 64/90 PRIAMOS III governor for engines < 15 MW combination of DC 1-04 and actuator StG 180	Diesel engines Gas Engines Gas Turbines Steam Turbines Gensets Pump drives Vessels Heavy-duty vehicles	Basic Manual -Login required- Manual PRIAMOS I Manual PRIAMOS II Manual PRIAMOS III
DC 2-02	Operating as part of HELENOS governor systems together with direct acting rotary actuators Power supply: 24 VDC Protection grade IP55 or IP00 Marine certified >> view certificates Explosive atmospheres certified >> view certificate HELENOS I governor for engines < 1 MW combination of DC 2-02 and actuators StG 6/10 HELENOS III governor for engines < 4 MW combination of DC 2-02 and actuators StG 16/30/40 HELENOS IV governor for engines < 800 kW combination of DC 2-02 and actuators BOSCH EDC HELENOS V governor for engines 80 kW-120 kW combination of DC 2-02 and actuators StG 2005DP / 2040 DP	Diesel engines Gas Engines Gas Turbines Steam Turbines Gensets Pump drives Marine Rail Traction Heavy-duty vehicles	Data Sheet DC 2-02 Basic Manual -Login required- Manual HELENOS I Manual HELENOS III Manual HELENOS IV Manual HELENOS V >> See download area for Russian manuals
DC 5	Especially robust and enduring controller for challenging operating conditions of industrial vehicles, operating together with small-size HEINZMANN actuators StG 3005/3010, StG 2005 and linear actuator series Power supply: 24 VDC, 12 VDC Protection grade IP66	Diesel engines Heavy-duty vehicles
DC 6	Operating as part of most powerful PANDAROS governors together with any type of HEINZMANN actuator up to 30 Nm torque Power supply: 24 VDC, 12 VDC Protection grade IP55 or IP00 Marine certified Explosive atmospheres certified >> view certificate PANDAROS I governor for engines < 1 MW combination of DC 6 and actuators StG 6/10 PANDAROS II governor for engines < 2 MW combination of DC 6 and actuators StG 2005, StG 2010/2040/2080 PANDAROS III governor for engines < 3 MW combination of DC 6 and actuators StG 16/30 PANDAROS IV governor for engines 80 kW-120 kW combination of DC 6 and actuators StG 2005DP / 2040 DP Twin-PANDAROS: extended version for control of 2 actuators	Diesel engines Gas Engines Gensets Pump drives Marine Heavy-duty vehicles	Data Sheet DC 6 Basic Manual -Login required- Manual PANDAROS I Manual PANDAROS II Manual PANDAROS III Manual PANDAROS IV >> See download area for Russian manuals
DC 6.200	Low current version of DC 6, combined with small actuators requiring drive currents up to 200mA, suitable for proportional electro-mechanical actuators, operating as positioner Power supply: 12 VDC, 24 VDC Protection grade IP00	Gas turbines Steam turbines Water turbines Gensets Heat Pumps	Data Sheet DC 6.200
DC 7	Economic, robust and enduring controller for diesel engines in on- and off-road vehicles, driving EDC actuators of BOSCH injection pumps directly or operating together with HEINZMANN StG 2010/2040/2080 actuators or LA 25/30 linear actuators in 2Q-operation. Power supply: 24 VDC Protection grade IP66K, IP X7, IP X9 DIN 40050	Diesel engines Off-road vehicles	Leaflet ORION Data Sheet DC 7
DC 8	Operating as part of speed governor system together with actuators StG 2010/2040/2080. Positioner capability and power management function, applicable as peripheral module to extend I/O abilities of main control unit and to drive another actuator Version for marine propulsion engines available with output 0-1 A, driving the range of RE hydraulic actuators Power supply: 24 VDC Protection grade IP00 Galvanically insulated CAN bus interface	Diesel engines Gas Engines Turbines Gensets Heavy-duty vehicles	Data Sheet DC 8
DC 9	Economic controller with competitive price-performance ratio, operating as a part of ORION governor systems together with small-size HEINZMANN actuators StG 3005/3010, StG 2005 and linear actuator series Power supply: 12 VDC, 24 VDC Protection grade IP00 Without classification	Diesel engines Gas Engines	Leaflet ORION Data Sheet Basic Manual -Login required- Manual ORION
DC 10	Economic controller for direct engine mounting with competitive price-performance ratio, operating as a part of ORION governor systems together with small-size HEINZMANN actuators StG 3005/3010, StG 2005 in 2Q-operation and linear actuator series Power supply: 9...30 VDC Protection grade IP6K9K	Diesel engines Gas Engines	Leaflet ORION Data Sheet
DC 12	Economic controller for direct engine mounting with competitive price-performance ratio, operating as a part of ORION governor systems, driving direct acting rotary StG 3005/3010, StG 2005 DP/2040 DP, StG 4002 actuators in 4Q-operation Power supply: 7...32 VDC Protection grade IP6K9K	Diesel engines Gas Engines Gensets Heavy-duty vehicles	Leaflet ORION Data Sheet DC 12

Control Unit

Speed Governor

Applications /
Engine Types

Documents

XIOS UC1
XIOS ECU Engine Control Unit Engine Control Unit XIOS IP6K /9K

The modular, universal XIOS controller presents an entirely new generation of ECU. It consists of a high-performance main board with high CPU power, large DRAM and FLASH memory. A FPGA logic chip leaves more computing power to the CPU for PLC functions or processor-intensive control tasks. Additional I/O boards can be attached to the main board in different number and type. They are configurable by software, jumperless and small in size.
XIOS enables customers to develop their own control functions based on CoDeSys (IEC 61131-3) or MATLAB™/Simulink. It is applicable for alarm and monitoring purposes just as well.

32 Bit 264 MHz processor
Communication interfaces Ethernet, CAN, RS232, RS485
optional 4.3" display
Protection grade IP00 or IP6K9K
Power supply: 9...32 VDC
Marine certified >> view certificates

Combustion engines
Turbines
Gensets

Leaflet XIOS

Data Sheet XIOS

Flyer XIOS-PLC

ADG-T
ADG-TT
Si-TEC ADG

The ADG (Advanced Digital Governor) for steam turbine drive applications is part of the Si-TEC product range developed and produced by HEINZMANN Australia. The ADG is the ultimate solution for steam turbine control performance and includes additional functions, features as well as communications for user-friendly operation.

Precise speed governing typically within 0.1 % of operating speed at steady state
Dual MPU (or Prox.) speed sensors for redundancy
Wide range of actuator interface options
Auto start and warm through sequence
Interpolating multiple speed PIDs
Process control for variable speed application (e.g. level control)
Single turbine governing used for constant or variable speed applications
Dual (tandem) turbine governing system (ADG-TT) used for constant or variable speed applications
Seamless (bumpless) transfer between control modes
Extensive user selected control functionality
Controlled test of over speed protection
Extensive alarm functions
On board diagnostics
Dedicated RS485 MODBUS® Port for customer PLC/DCS interface

Steam Turbines

Refineries
Petrochemical
Compressors
Pumps
Mills
Vessels

Data Sheet Si-TEC ADG

Viking35
governor ECU Viking 35

ECU with large range of I/O's for most diverse and complex control and monitoring tasks

Operated in conjunction with the range of hydraulic actuators by Regulateurs Europa

Protection grade IP00
Power supply: 24 VDC

Diesel engines
Dual Fuel Engines
Turbines

Marine
Rail Traction
Gensets

Data Sheet Viking35

DC 1-03
speed governor DC-1-03
DC 1-04
speed governor DC-1-04

Operating as part of PRIAMOS governor systems together with HEINZMANN rotary actuators with gearing
DC 1-04 driving up to 2 actuators

Power supply: 24 VDC
Protection grade IP55
Marine certified >> view certificates

PRIAMOS I governor for engines < 5 MW
combination of DC 1-03 and actuators StG 16/30/40

PRIAMOS II governor for engines < 10 MW
combination of DC 1-03 and actuators StG 64/90

PRIAMOS III governor for engines < 15 MW
combination of DC 1-04 and actuator StG 180

Diesel engines
Gas Engines
Gas Turbines
Steam Turbines

Gensets
Pump drives
Vessels
Heavy-duty vehicles

Basic Manual
-Login required-

Manual PRIAMOS I

Manual PRIAMOS II

Manual PRIAMOS III

DC 2-02
speed governor DC-2
speed governor DC-2 / IP-55

Operating as part of HELENOS governor systems together with direct acting rotary actuators

Power supply: 24 VDC
Protection grade IP55 or IP00
Marine certified >> view certificates
Explosive atmospheres certified >> view certificate

HELENOS I governor for engines < 1 MW
combination of DC 2-02 and actuators StG 6/10

HELENOS III governor for engines < 4 MW
combination of DC 2-02 and actuators StG 16/30/40

HELENOS IV governor for engines < 800 kW
combination of DC 2-02 and actuators BOSCH EDC

HELENOS V governor for engines 80 kW-120 kW
combination of DC 2-02 and actuators StG 2005DP / 2040 DP

Diesel engines
Gas Engines
Gas Turbines
Steam Turbines

Gensets
Pump drives
Marine
Rail Traction
Heavy-duty vehicles

Data Sheet DC 2-02

Basic Manual
-Login required-

>> See download area for Russian manuals

DC 5
speed governor DC 5

Especially robust and enduring controller for challenging operating conditions of industrial vehicles, operating together with small-size HEINZMANN actuators StG 3005/3010, StG 2005 and linear actuator series

Power supply: 24 VDC, 12 VDC
Protection grade IP66

Diesel engines

Heavy-duty vehicles

DC 6
speed governor DC-6
speed governor DC-6 - IP55

Operating as part of most powerful PANDAROS governors together with any type of HEINZMANN actuator up to 30 Nm torque

Power supply: 24 VDC, 12 VDC
Protection grade IP55 or IP00
Marine certified
Explosive atmospheres certified >> view certificate

PANDAROS I governor for engines < 1 MW
combination of DC 6 and actuators StG 6/10

PANDAROS II governor for engines < 2 MW
combination of DC 6 and actuators StG 2005, StG 2010/2040/2080

PANDAROS III governor for engines < 3 MW
combination of DC 6 and actuators StG 16/30

PANDAROS IV governor for engines 80 kW-120 kW
combination of DC 6 and actuators StG 2005DP / 2040 DP

Twin-PANDAROS: extended version for control of 2 actuators

Diesel engines
Gas Engines

Gensets
Pump drives
Marine
Heavy-duty vehicles

Data Sheet DC 6

Basic Manual
-Login required-

>> See download area for Russian manuals

DC 6.200
DC 6 200 speed governor

Low current version of DC 6, combined with small actuators requiring drive currents up to 200mA, suitable for proportional electro-mechanical actuators, operating as positioner

Power supply: 12 VDC, 24 VDC
Protection grade IP00

Gas turbines
Steam turbines
Water turbines

Gensets
Heat Pumps

Data Sheet DC 6.200

DC 7

Economic, robust and enduring controller for diesel engines in on- and off-road vehicles, driving EDC actuators of BOSCH injection pumps directly or operating together with HEINZMANN StG 2010/2040/2080 actuators or LA 25/30 linear actuators in 2Q-operation.

Power supply: 24 VDC
Protection grade IP66K, IP X7, IP X9 DIN 40050

Diesel engines

Off-road vehicles

Leaflet ORION

Data Sheet DC 7

DC 8

Operating as part of speed governor system together with actuators StG 2010/2040/2080.
Positioner capability and power management function, applicable as peripheral module to extend I/O abilities of main control unit and to drive another actuator
Version for marine propulsion engines available with output 0-1 A, driving the range of RE hydraulic actuators

Power supply: 24 VDC
Protection grade IP00
Galvanically insulated CAN bus interface

Diesel engines
Gas Engines
Turbines

Gensets
Heavy-duty vehicles

Data Sheet
DC 8

DC 9

Economic controller with competitive price-performance ratio, operating as a part of ORION governor systems together with small-size HEINZMANN actuators StG 3005/3010, StG 2005 and linear actuator series

Power supply: 12 VDC, 24 VDC
Protection grade IP00
Without classification

Diesel engines
Gas Engines

Leaflet ORION

Data Sheet

Basic Manual
-Login required-

Manual ORION

DC 10

Economic controller for direct engine mounting with competitive price-performance ratio, operating as a part of ORION governor systems together with small-size HEINZMANN actuators StG 3005/3010, StG 2005 in 2Q-operation and linear actuator series

Power supply: 9...30 VDC
Protection grade IP6K9K

Diesel engines
Gas Engines

Leaflet ORION

Data Sheet

DC 12
speed governor DC 12

Economic controller for direct engine mounting with competitive price-performance ratio, operating as a part of ORION governor systems, driving direct acting rotary StG 3005/3010, StG 2005 DP/2040 DP, StG 4002 actuators in 4Q-operation

Power supply: 7...32 VDC
Protection grade IP6K9K

Diesel engines
Gas Engines

Gensets
Heavy-duty vehicles

Leaflet ORION

Data Sheet DC 12

Analogue Speed Governors

HEINZMANN analogue, all-electronic speed governors are suitable for relatively simply governing tasks with yet high demands on governing quality. They offer very short response times with little overshooting and high accuracy of speed control. Installation on the engine is simple and cost efficient. Genset related tasks such as automatic synchronization, load sharing, and load anticipation can be carried out by means of accessories offered by HEINZMANN.

Control Unit	Speed Governor > please see this ALLOCATION TABLE for comparing/selecting combinations of actuator and control unit	Applications / Engine Types	Documents
KG 1/2	E 1-F / E 2-F governor for engines < 200 kW combination of KG 1/2 and direct acting actuators StG 1/2	Diesel engines Gas engines Gensets Pump drives	Manual E 1-F / E 2-F
KG 6 / 10 KG 16 / 30 / 40 KG 64 / 90	E 6 / E 10 governor for engines < 1 MW combination of KG 6/10 and geared actuators StG 6/10 E 16 / E 30 / E 40: engines < 1 MW combination of KG 16/30/40 and geared actuators StG 16/30/40 E 64 / E 90: engines < 1 MW combination of KG 64/90 and geared actuators StG 64/90	Diesel engines Gas engines Gensets Pump drives Vessels Locomotives	Manual E 6 / E 10 Manual E 16 / E 30 / E 40 Manual E 64 / E 90
KG 2005 KG 2010 KG 2040 KG 2080	E 2005 / E 2010 / E 2040 / E 2080 governor for engines < 800 kW combination of KG 2005/2010/2040/2080 and direct acting actuators StG 2005, StG 2010/2040/2080	Diesel engines Gas engines Gas turbines Steam turbines Gensets Pump drives Vessels Locomotives	Manual E 2005 / E 2010 / E 2040 / E 2080
ORION AC 3	ORION governor for engines < 1 MW combination of AC 3 and direct acting actuators StG 3005/3010 and linear actuator series, working with both digital and anlogue feedback		Manual ORION

EFI Controllers DARDANOS

In addition to its primary purpose of speed control, this EFI controller series provides features which are beneficial for engine performance, such as optimised fuel efficiency, increased engine power, and fewer environmentally harmful emissions.
DARDANOS EFI controllers operate as a part of >> Common Rail or >> PLN injection systems for diesel engines. For gas injection, they are used in conjunction with electrically actuated >> gas admission valves or gas injectors. Dual-fuel engines can be controlled using a combination of both diesel and gas injection components.

Product	Description	Documents
MVC 01-24	EFI controller for solenoid actuated electronic fuel injection of industrial diesel, gas and dual fuel engines up to a maximum of 24 cylinders; comprises up to seven precise injections per cylinder and stroke; features a convenient number of I/O for optimum engine operation and monitoring; compatible with any solenoid based fuel injection system; for gas injection, combined with any MEGASOL gas admission valves Application areas: - Electronic fuel injection at diesel engines, stationary and mobile - Gas admission valves for gas or dual-fuel engines - Combination of common rail and gas admission control	Data Sheet MVC 01-24 >> Certificates
MVC 01-20	EFI controller for solenoid actuated electronic fuel injection of industrial diesel, gas and dual fuel engines up to a maximum of 20 cylinders; comprises up to five precise injections per cylinder and stroke; features a convenient number of I/O for optimum engine operation and monitoring; compatible with any solenoid based fuel injection system; for gas injection, combined with any MEGASOL gas admission valves Application areas: - Electronic fuel injection for diesel engines, stationary and mobile - Gas injection for gas, dual-fuel engines	Data Sheet MVC 01-20 Manual DARDANOS -Login required- >> Certificates
MVC 03-8	EFI controller for industrial engines such as diesel, gas and dual fuel with up to 8 cylinders. Wide functionality and convenient number of I/O for optimal engine operation and monitoring.	Manual DARDANOS -Login required- Flyer MVC 03-8 New Generation
MVC 04-6	EFI controller for industrial diesel, gas and dual fuel engines with up to 6 cylinders. Wide functionality and convenient number of I/O for optimal engine operation and monitoring. For gas injection, combined with MEGASOL 200 gas admission valves.	Manual DARDANOS -Login required-